Scytek electronic 100RS Manual descargar pdf (Pagina 20)

Jumper Selection

Carefully separate the top and bottom halves of the main unit case. Once the cover is removed, the parking

light polarity jumper will be visible next to the parking light relay. Set the jumper for the correct polarity

output as described below, then reassemble the main unit case.

Parking Light Output. Selects the polarity (+/-) for the output of the on-board Parking Light relay.

Left Pin and Center Pin = negative

Right Pin and Center Pin = positive

Jumper

Settings

default setting shown

rking Light Relay

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

Sin comentarios

Scytek electronic 100RS Manual Pagina 20